This section describes the syntax with which __attribute__ may be
used, and the constructs to which attribute specifiers bind, for the C
language. Some details may vary for C++ and Objective-C. Because of
infelicities in the grammar for attributes, some forms described here
may not be successfully parsed in all cases.
There are some problems with the semantics of attributes in C++. For
example, there are no manglings for attributes, although they may affect
code generation, so problems may arise when attributed types are used in
conjunction with templates or overloading. Similarly, typeid
does not distinguish between types with different attributes. Support
for attributes in C++ may be restricted in future to attributes on
declarations only, but not on nested declarators.
See Function Attributes, for details of the semantics of attributes applying to functions. See Variable Attributes, for details of the semantics of attributes applying to variables. See Type Attributes, for details of the semantics of attributes applying to structure, union and enumerated types.
An attribute specifier is of the form
__attribute__ ((attribute-list)). An attribute list
is a possibly empty comma-separated sequence of attributes, where
each attribute is one of the following:
unused, or a reserved
word such as const).
mode attributes use this form.
format attributes use this form.
format_arg attributes use this form with the list being a single
integer constant expression, and alias attributes use this form
with the list being a single string constant.
An attribute specifier list is a sequence of one or more attribute specifiers, not separated by any other tokens.
In GNU C, an attribute specifier list may appear after the colon following a
label, other than a case or default label. The only
attribute it makes sense to use after a label is unused. This
feature is intended for code generated by programs which contains labels
that may be unused but which is compiled with -Wall. It would
not normally be appropriate to use in it human-written code, though it
could be useful in cases where the code that jumps to the label is
contained within an #ifdef conditional. GNU C++ does not permit
such placement of attribute lists, as it is permissible for a
declaration, which could begin with an attribute list, to be labelled in
C++. Declarations cannot be labelled in C90 or C99, so the ambiguity
does not arise there.
An attribute specifier list may appear as part of a struct,
union or enum specifier. It may go either immediately
after the struct, union or enum keyword, or after
the closing brace. The former syntax is preferred.
Where attribute specifiers follow the closing brace, they are considered
to relate to the structure, union or enumerated type defined, not to any
enclosing declaration the type specifier appears in, and the type
defined is not complete until after the attribute specifiers.
Otherwise, an attribute specifier appears as part of a declaration, counting declarations of unnamed parameters and type names, and relates to that declaration (which may be nested in another declaration, for example in the case of a parameter declaration), or to a particular declarator within a declaration. Where an attribute specifier is applied to a parameter declared as a function or an array, it should apply to the function or array rather than the pointer to which the parameter is implicitly converted, but this is not yet correctly implemented.
Any list of specifiers and qualifiers at the start of a declaration may
contain attribute specifiers, whether or not such a list may in that
context contain storage class specifiers. (Some attributes, however,
are essentially in the nature of storage class specifiers, and only make
sense where storage class specifiers may be used; for example,
section.) There is one necessary limitation to this syntax: the
first old-style parameter declaration in a function definition cannot
begin with an attribute specifier, because such an attribute applies to
the function instead by syntax described below (which, however, is not
yet implemented in this case). In some other cases, attribute
specifiers are permitted by this grammar but not yet supported by the
compiler. All attribute specifiers in this place relate to the
declaration as a whole. In the obsolescent usage where a type of
int is implied by the absence of type specifiers, such a list of
specifiers and qualifiers may be an attribute specifier list with no
other specifiers or qualifiers.
At present, the first parameter in a function prototype must have some
type specifier which is not an attribute specifier; this resolves an
ambiguity in the interpretation of void f(int
(__attribute__((foo)) x)), but is subject to change. At present, if
the parentheses of a function declarator contain only attributes then
those attributes are ignored, rather than yielding an error or warning
or implying a single parameter of type int, but this is subject to
change.
An attribute specifier list may appear immediately before a declarator (other than the first) in a comma-separated list of declarators in a declaration of more than one identifier using a single list of specifiers and qualifiers. Such attribute specifiers apply only to the identifier before whose declarator they appear. For example, in
__attribute__((noreturn)) void d0 (void),
__attribute__((format(printf, 1, 2))) d1 (const char *, ...),
d2 (void)
the noreturn attribute applies to all the functions
declared; the format attribute only applies to d1.
An attribute specifier list may appear immediately before the comma,
= or semicolon terminating the declaration of an identifier other
than a function definition. Such attribute specifiers apply
to the declared object or function. Where an
assembler name for an object or function is specified (see Asm Labels), the attribute must follow the asm
specification.
An attribute specifier list may, in future, be permitted to appear after the declarator in a function definition (before any old-style parameter declarations or the function body).
Attribute specifiers may be mixed with type qualifiers appearing inside
the [] of a parameter array declarator, in the C99 construct by
which such qualifiers are applied to the pointer to which the array is
implicitly converted. Such attribute specifiers apply to the pointer,
not to the array, but at present this is not implemented and they are
ignored.
An attribute specifier list may appear at the start of a nested
declarator. At present, there are some limitations in this usage: the
attributes correctly apply to the declarator, but for most individual
attributes the semantics this implies are not implemented.
When attribute specifiers follow the * of a pointer
declarator, they may be mixed with any type qualifiers present.
The following describes the formal semantics of this syntax. It will make the
most sense if you are familiar with the formal specification of
declarators in the ISO C standard.
Consider (as in C99 subclause 6.7.5 paragraph 4) a declaration T
D1, where T contains declaration specifiers that specify a type
Type (such as int) and D1 is a declarator that
contains an identifier ident. The type specified for ident
for derived declarators whose type does not include an attribute
specifier is as in the ISO C standard.
If D1 has the form ( attribute-specifier-list D ),
and the declaration T D specifies the type
“derived-declarator-type-list Type” for ident, then
T D1 specifies the type “derived-declarator-type-list
attribute-specifier-list Type” for ident.
If D1 has the form *
type-qualifier-and-attribute-specifier-list D, and the
declaration T D specifies the type
“derived-declarator-type-list Type” for ident, then
T D1 specifies the type “derived-declarator-type-list
type-qualifier-and-attribute-specifier-list Type” for
ident.
For example,
void (__attribute__((noreturn)) ****f) (void);
specifies the type “pointer to pointer to pointer to pointer to
non-returning function returning void”. As another example,
char *__attribute__((aligned(8))) *f;
specifies the type “pointer to 8-byte-aligned pointer to char”.
Note again that this does not work with most attributes; for example,
the usage of aligned and noreturn attributes given above
is not yet supported.
For compatibility with existing code written for compiler versions that did not implement attributes on nested declarators, some laxity is allowed in the placing of attributes. If an attribute that only applies to types is applied to a declaration, it will be treated as applying to the type of that declaration. If an attribute that only applies to declarations is applied to the type of a declaration, it will be treated as applying to that declaration; and, for compatibility with code placing the attributes immediately before the identifier declared, such an attribute applied to a function return type will be treated as applying to the function type, and such an attribute applied to an array element type will be treated as applying to the array type. If an attribute that only applies to function types is applied to a pointer-to-function type, it will be treated as applying to the pointer target type; if such an attribute is applied to a function return type that is not a pointer-to-function type, it will be treated as applying to the function type.