— Macro: DBX_DEBUGGING_INFO

Define this macro if GCC should produce debugging output for DBX in response to the -g option.

— Macro: XCOFF_DEBUGGING_INFO

Define this macro if GCC should produce XCOFF format debugging output in response to the -g option. This is a variant of DBX format.

— Macro: DEFAULT_GDB_EXTENSIONS

Define this macro to control whether GCC should by default generate GDB's extended version of DBX debugging information (assuming DBX-format debugging information is enabled at all). If you don't define the macro, the default is 1: always generate the extended information if there is any occasion to.

— Macro: DEBUG_SYMS_TEXT

Define this macro if all .stabs commands should be output while in the text section.

— Macro: ASM_STABS_OP

A C string constant, including spacing, naming the assembler pseudo op to use instead of "\t.stabs\t" to define an ordinary debugging symbol. If you don't define this macro, "\t.stabs\t" is used. This macro applies only to DBX debugging information format.

— Macro: ASM_STABD_OP

A C string constant, including spacing, naming the assembler pseudo op to use instead of "\t.stabd\t" to define a debugging symbol whose value is the current location. If you don't define this macro, "\t.stabd\t" is used. This macro applies only to DBX debugging information format.

— Macro: ASM_STABN_OP

A C string constant, including spacing, naming the assembler pseudo op to use instead of "\t.stabn\t" to define a debugging symbol with no name. If you don't define this macro, "\t.stabn\t" is used. This macro applies only to DBX debugging information format.

— Macro: DBX_NO_XREFS

Define this macro if DBX on your system does not support the construct xstagname. On some systems, this construct is used to describe a forward reference to a structure named tagname. On other systems, this construct is not supported at all.

— Macro: DBX_CONTIN_LENGTH

A symbol name in DBX-format debugging information is normally continued (split into two separate .stabs directives) when it exceeds a certain length (by default, 80 characters). On some operating systems, DBX requires this splitting; on others, splitting must not be done. You can inhibit splitting by defining this macro with the value zero. You can override the default splitting-length by defining this macro as an expression for the length you desire.

— Macro: DBX_CONTIN_CHAR

Normally continuation is indicated by adding a \ character to the end of a .stabs string when a continuation follows. To use a different character instead, define this macro as a character constant for the character you want to use. Do not define this macro if backslash is correct for your system.

— Macro: DBX_STATIC_STAB_DATA_SECTION

Define this macro if it is necessary to go to the data section before outputting the .stabs pseudo-op for a non-global static variable.

— Macro: DBX_TYPE_DECL_STABS_CODE

The value to use in the “code” field of the .stabs directive for a typedef. The default is N_LSYM.

— Macro: DBX_STATIC_CONST_VAR_CODE

The value to use in the “code” field of the .stabs directive for a static variable located in the text section. DBX format does not provide any “right” way to do this. The default is N_FUN.

— Macro: DBX_REGPARM_STABS_CODE

The value to use in the “code” field of the .stabs directive for a parameter passed in registers. DBX format does not provide any “right” way to do this. The default is N_RSYM.

— Macro: DBX_REGPARM_STABS_LETTER

The letter to use in DBX symbol data to identify a symbol as a parameter passed in registers. DBX format does not customarily provide any way to do this. The default is 'P'.

— Macro: DBX_FUNCTION_FIRST

Define this macro if the DBX information for a function and its arguments should precede the assembler code for the function. Normally, in DBX format, the debugging information entirely follows the assembler code.

— Macro: DBX_BLOCKS_FUNCTION_RELATIVE

Define this macro, with value 1, if the value of a symbol describing the scope of a block (N_LBRAC or N_RBRAC) should be relative to the start of the enclosing function. Normally, GCC uses an absolute address.

— Macro: DBX_LINES_FUNCTION_RELATIVE

Define this macro, with value 1, if the value of a symbol indicating the current line number (N_SLINE) should be relative to the start of the enclosing function. Normally, GCC uses an absolute address.

— Macro: DBX_USE_BINCL

Define this macro if GCC should generate N_BINCL and N_EINCL stabs for included header files, as on Sun systems. This macro also directs GCC to output a type number as a pair of a file number and a type number within the file. Normally, GCC does not generate N_BINCL or N_EINCL stabs, and it outputs a single number for a type number.