— Macro: CONSTRAINT_LEN (char, str)

For the constraint at the start of str, which starts with the letter c, return the length. This allows you to have register class / constant / extra constraints that are longer than a single letter; you don't need to define this macro if you can do with single-letter constraints only. The definition of this macro should use DEFAULT_CONSTRAINT_LEN for all the characters that you don't want to handle specially. There are some sanity checks in genoutput.c that check the constraint lengths for the md file, so you can also use this macro to help you while you are transitioning from a byzantine single-letter-constraint scheme: when you return a negative length for a constraint you want to re-use, genoutput will complain about every instance where it is used in the md file.

— Macro: REG_CLASS_FROM_LETTER (char)

A C expression which defines the machine-dependent operand constraint letters for register classes. If char is such a letter, the value should be the register class corresponding to it. Otherwise, the value should be NO_REGS. The register letter r, corresponding to class GENERAL_REGS, will not be passed to this macro; you do not need to handle it.

— Macro: REG_CLASS_FROM_CONSTRAINT (char, str)

Like REG_CLASS_FROM_LETTER, but you also get the constraint string passed in str, so that you can use suffixes to distinguish between different variants.

— Macro: CONST_OK_FOR_LETTER_P (value, c)

A C expression that defines the machine-dependent operand constraint letters (I, J, K, ... P) that specify particular ranges of integer values. If c is one of those letters, the expression should check that value, an integer, is in the appropriate range and return 1 if so, 0 otherwise. If c is not one of those letters, the value should be 0 regardless of value.

— Macro: CONST_OK_FOR_CONSTRAINT_P (value, c, str)

Like CONST_OK_FOR_LETTER_P, but you also get the constraint string passed in str, so that you can use suffixes to distinguish between different variants.

— Macro: CONST_DOUBLE_OK_FOR_LETTER_P (value, c)

A C expression that defines the machine-dependent operand constraint letters that specify particular ranges of const_double values (G or H).

If c is one of those letters, the expression should check that value, an RTX of code const_double, is in the appropriate range and return 1 if so, 0 otherwise. If c is not one of those letters, the value should be 0 regardless of value.

const_double is used for all floating-point constants and for DImode fixed-point constants. A given letter can accept either or both kinds of values. It can use GET_MODE to distinguish between these kinds.

— Macro: CONST_DOUBLE_OK_FOR_CONSTRAINT_P (value, c, str)

Like CONST_DOUBLE_OK_FOR_LETTER_P, but you also get the constraint string passed in str, so that you can use suffixes to distinguish between different variants.

— Macro: EXTRA_CONSTRAINT (value, c)

A C expression that defines the optional machine-dependent constraint letters that can be used to segregate specific types of operands, usually memory references, for the target machine. Any letter that is not elsewhere defined and not matched by REG_CLASS_FROM_LETTER / REG_CLASS_FROM_CONSTRAINT may be used. Normally this macro will not be defined.

If it is required for a particular target machine, it should return 1 if value corresponds to the operand type represented by the constraint letter c. If c is not defined as an extra constraint, the value returned should be 0 regardless of value.

For example, on the ROMP, load instructions cannot have their output in r0 if the memory reference contains a symbolic address. Constraint letter Q is defined as representing a memory address that does not contain a symbolic address. An alternative is specified with a Q constraint on the input and r on the output. The next alternative specifies m on the input and a register class that does not include r0 on the output.

— Macro: EXTRA_CONSTRAINT_STR (value, c, str)

Like EXTRA_CONSTRAINT, but you also get the constraint string passed in str, so that you can use suffixes to distinguish between different variants.

— Macro: EXTRA_MEMORY_CONSTRAINT (c, str)

A C expression that defines the optional machine-dependent constraint letters, amongst those accepted by EXTRA_CONSTRAINT, that should be treated like memory constraints by the reload pass.

It should return 1 if the operand type represented by the constraint at the start of str, the first letter of which is the letter c, comprises a subset of all memory references including all those whose address is simply a base register. This allows the reload pass to reload an operand, if it does not directly correspond to the operand type of c, by copying its address into a base register.

For example, on the S/390, some instructions do not accept arbitrary memory references, but only those that do not make use of an index register. The constraint letter Q is defined via EXTRA_CONSTRAINT as representing a memory address of this type. If the letter Q is marked as EXTRA_MEMORY_CONSTRAINT, a Q constraint can handle any memory operand, because the reload pass knows it can be reloaded by copying the memory address into a base register if required. This is analogous to the way a o constraint can handle any memory operand.

— Macro: EXTRA_ADDRESS_CONSTRAINT (c, str)

A C expression that defines the optional machine-dependent constraint letters, amongst those accepted by EXTRA_CONSTRAINT / EXTRA_CONSTRAINT_STR, that should be treated like address constraints by the reload pass.

It should return 1 if the operand type represented by the constraint at the start of str, which starts with the letter c, comprises a subset of all memory addresses including all those that consist of just a base register. This allows the reload pass to reload an operand, if it does not directly correspond to the operand type of str, by copying it into a base register.

Any constraint marked as EXTRA_ADDRESS_CONSTRAINT can only be used with the address_operand predicate. It is treated analogously to the p constraint.